Stainless Steel Bevel Gears
Stainless Steel Bevel Gear Specifications
Stainless steel bevel gears are typically produced by machining them from a solid block of stainless steel. The gear teeth are then finely ground to achieve a precise shape and finish. These gears come with various surface finishes, such as polished, matte, and black oxide. They are available in different sizes and ratios, with the size being determined by the gear diameter and tooth count. The gear ratio is defined by the number of teeth on the driving gear compared to the driven gear.
Material: Stainless steel 1.4305 (AISI 303). Tooth quality 8 modeled on DIN 3967 (from module 2). Crowned, milled teeth. Shaft angle 90ยบ. The bevel gears operate as a pair only at the specified ratio and the same module.
| Transmission | Module | No. of Teeth | da | d | ND | NL | L1 | L | S | b | BH7 | E | Admissible MD | Weight |
| [i] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [mm] | [Nm] | [kg] | ||
| 1:1 (16/16) | 1 | 16 | 17,4 | 16 | 14 | 7,0 | 10 | 11,2 | 8,7 | 4,0 | 5 | 16 | 0,06 | 0,009 |
| 1:1 (16/16) | 1,5 | 16 | 26,1 | 24,0 | 20 | 11,0 | 15 | 17,3 | 14,1 | 5,1 | 8 | 25 | 0,19 | 0,032 |
| 1:1 (16/16) | 2 | 16 | 34,8 | 32 | 25 | 11,5 | 18 | 20,7 | 16,4 | 6,8 | 10 | 31 | 0,46 | 0,066 |
| 1:1 (16/16) | 2,5 | 16 | 43,7 | 40,0 | 30 | 10,0 | 21 | 23,8 | 16,8 | 11 | 10 | 35 | 1,1 | 0,120 |
| 1:1 (16/16) | 3 | 16 | 52,4 | 48 | 40 | 12,0 | 24 | 27,7 | 18,2 | 15 | 10 | 40 | 2,0 | 0,240 |
| 1:1 (16/16) | 4 | 16 | 70,0 | 64 | 50 | 11,0 | 29 | 32,9 | 21,0 | 19 | 20 | 50 | 4,8 | 0,420 |
| 2:1 (15/30) | 1 | 15 | 17,4 | 15 | 13 | 6,5 | 11 | 11,9 | 7,6 | 5,0 | 5 | 22 | 0,08 | 0,010 |
| 2:1 (15/30) | 1 | 30 | 30,6 | 30 | 20 | 9,0 | 13 | 15,1 | 13,1 | 5,0 | 5 | 20 | 0,16 | 0,040 |
| 2:1 (15/30) | 1,5 | 15 | 26,1 | 22,5 | 18 | 6,5 | 13 | 14,8 | 8,4 | 7,6 | 8 | 30 | 0,27 | 0,026 |
| 2:1 (15/30) | 1,5 | 30 | 45,9 | 45,0 | 30 | 12,0 | 18 | 20,7 | 17,6 | 7,6 | 10 | 28 | 0,5 |