Splined Yoke 05 – Push Pin Type
The Splined Yoke 05 – Push Pin Type is a precision-machined PTO shaft end yoke featuring a push pin with extended spline engagement length for higher torque capacity compared to the 01 series. Engineered from forged alloy steel with splined bore connection, it provides a secure, high-torque interface between the PTO shaft and universal joint assembly. Available in multiple series to fit standard agricultural and industrial drivelines, this yoke is CNC-machined, heat-treated, and surface-coated for continuous field operation. Supplied by Ever-power with ISO 9001:2015 quality assurance and global shipping.
Splined Yoke 05 Extended Push Pin – High-Torque Quick-Connect PTO Yoke
Extended spline push pin | +20% torque vs 01 | B/D/G sub-types | Series 1–8
The Ever-power Splined Yoke 05 builds on the convenience of the 01 push pin while extending the spline engagement zone by approximately 20%, delivering greater torque capacity for heavier implements. Offered in B (Z6), D (Z21), and G (8-32) sub-types, it bridges the gap between the entry-level 01 and the semi-permanent 02, giving operators quick-disconnect convenience at a higher torque rating.
🔧 Technical Specifications
| Series | A (mm) | B (mm) | C (mm) | E (mm) | F (Spline) |
|---|---|---|---|---|---|
| 1.005B | 22 | 54 | varies | varies | 1 3/8"Z6 |
| 2.005B | 23.8 | 61.3 | varies | varies | 1 3/8"Z6 |
| 3.005B | 27 | 70 | varies | varies | 1 3/8"Z6 |
| 5.005B | 30.2 | 80 | varies | varies | 1 3/8"Z6 |
| 6.005B | 30.2 | 92 | varies | varies | 1 3/8"Z6 |
| 7.005B | 30.2 | 106.5 | varies | varies | 1 3/8"Z6 |
| 8.005B | 35 | 106.5 | varies | varies | 1 3/8"Z6 |
⭐ Key Features & Benefits
🔒
Extended Push Pin
Deeper shaft engagement and longer spline zone boost torque rating ~20% over the 01 series.
💪
B/D/G Sub-Types
Z6, Z21, and 8-32×38×6 spline options for broad shaft compatibility.
🔧
Heavy-Duty Quick Connect
Combines the convenience of push pin with the strength needed for larger implements.
⚙️
Series 1–8 Coverage
Comprehensive range from 22 mm bore to 35 mm bore.
🔄 Compatibility Information
Designed for medium-to-heavy-duty PTO implements that still benefit from push pin quick disconnect. Fits 1 3/8" Z6, 1 3/8" Z21, and 8-32×38×6 shafts from Walterscheid, Bondioli & Pavesi, Comer, and Ever-power. Ideal for hay balers, large rotary mowers, TMR feed wagons, and manure spreaders on 80–150 HP tractors.
📚 Selection Guide
Step 1: Determine if your implement torque exceeds the 01 series rating — if so, the 05 is your upgrade.
Step 2: Identify your spline type to select B, D, or G sub-type.
Step 3: Match bore and ear dimensions in the spec table to your driveline.
Step 4: Confirm the push pin groove position on your shaft is compatible with the 05 engagement length.
🌾 Typical Application Scenarios
🌾 Hay Balers
Higher torque capacity handles the cyclical peak loads of baling without compromising quick-release convenience.
🌿 Large Rotary Mowers
Wide-deck mowers on 100+ HP tractors benefit from the 05’s enhanced torque margin.
🐄 TMR Feed Wagons
Heavy mixing loads demand more spline engagement than the 01 provides.
💾 Large Manure Spreaders
Chain-driven spreaders with high inertia loads during startup.
🛠️ Installation & Usage Guide
Verify your shaft has a push pin groove positioned to match the 05’s extended engagement length.
Depress the push pin and slide the yoke fully onto the splined shaft.
Release the pin and confirm it snaps into the groove with an audible click.
Test retention by pulling firmly on the yoke — it should not move.
Install cross kit, grease all fittings, and run at idle to verify smooth operation.
Re-check the push pin after the first 10 hours of operation to ensure spring tension is maintained.
❓ Frequently Asked Questions
⭐ Customer Reviews
★★★★★
Upgraded from 01 to 05 on our round baler driveline near Shepparton. The extra engagement gives us peace of mind during peak baling loads.
Bill K. — 🇦🇺 Australia
★★★★★
The 05 is the sweet spot — push pin convenience with enough torque margin for our 120 HP application.
Dieter R. — 🇩🇪 Germany
★★★★☆
Good extended yoke. Push pin mechanism is solid. Wish the G sub-type was available in Series 7.
Thierry L. — 🇫🇷 France
★★★★★
We supply 05 yokes to TMR wagon manufacturers. Quality and consistency meet OEM standards.
Ramesh K. — 🇮🇳 India
★★★★★
Perfect for our Vermeer baler. Quick disconnect at the end of the day, robust torque capacity all day long.
Doug H. — 🇺🇸 United States
📈 Our Product vs. Low-Quality Alternatives
| Feature | Ever-power Yoke | Low-Quality Alternative |
|---|---|---|
| Spline Length | ✔ Extended (+20% vs 01) | ✘ Standard short engagement |
| Torque Rating | ✔ Medium-heavy duty | ✘ Light duty only |
| Connection | ✔ Push pin quick-release | ✘ Push pin quick-release |
| Sub-Types | ✔ B, D, G | ✘ B only |
| Material | ✔ Forged C45 steel | ✘ Cast iron |
| Quality | ✔ ISO 9001:2015 | ✘ No certification |
🔗 Related Products & Accessories
Push Pin Spares
Replacement pin assemblies for field service
Cross & Bearing Kits
U-joint kits for 05 yoke ears
01 Series Yokes
Lighter-duty push pin alternative
PTO Safety Shields
Guards for medium-duty drivelines
Complete PTO Shafts
Assembled medium-duty packages
🏆 Certifications & Standards
🏆
ISO 9001:2015
Quality management system certified by accredited body
🛡️
Material Test Reports
EN 10204 3.1 mill certificates for every steel batch
✅
CE Compliance
Meets European machinery safety directives
🔎
100% Inspection
Every yoke dimensionally verified before shipment
🏭 Why Choose Ever-power?
We are Ever-power, and the 05 extended push pin yoke bridges the gap between convenience and capacity. It is our answer to customers who love the push pin but need more torque. 20+ years, ISO 9001:2015, 50+ countries.
📞 Ready to Order? Let’s Talk!
Whether you need a single replacement yoke or a container-load OEM order, our team is here to assist. Contact us for competitive pricing, rapid delivery, and expert technical support.
or visit australia-drive.com to explore our full catalogue
Explore: Ever-power homepage | Contact us
The Splined Yoke 05 – Push Pin Type is a precision-machined PTO shaft end yoke featuring a push pin with extended spline engagement length for higher torque capacity compared to the 01 series. Engineered from forged alloy steel with splined bore connection, it provides a secure, high-torque interface between the PTO shaft and universal joint assembly. Available in multiple series to fit standard agricultural and industrial drivelines, this yoke is CNC-machined, heat-treated, and surface-coated for continuous field operation. Supplied by Ever-power with ISO 9001:2015 quality assurance and global shipping.
