Fiat Tractor Hydraulic Gear Pump Replacement 25ml 200bar

GBC-FIAT-25ML — Fiat Tractor Hydraulic Gear Pump Replacement 25ml 200bar

The 25 ml/rev displacement at 200 bar maximum pressure represents the upper end of Fiat tractor hydraulic pump specifications, reserved for models designed for heavy-implement and high-pressure hydraulic applications. Where smaller Fiat models typically use 16–20 ml/rev pumps at 175 bar, the 25 ml/200 bar specification provides substantially higher flow and pressure capacity, supporting the operation of larger 3-point hitch implements, multiple simultaneous remote cylinder circuits, and high-demand front loader applications on larger Fiat tractors.

The {sku} is an aftermarket replacement gear pump with 25 ml/rev displacement and 200 bar pressure rating for Fiat tractor series requiring this specification. Displacement and pressure rating must both be confirmed against your existing pump before ordering — substituting a 25 ml pump where a lower displacement is specified will result in over-supply to the hydraulic circuit. For the full Fiat and European tractor hydraulic range, visit the GBC homepage.

Technical Specifications

High-Pressure Hydraulic Applications and Heavy Implement Use

Fiat tractors specified with the 25 ml/200 bar pump are typically larger-frame models designed for heavy implement work. In Australian agricultural contexts, this could include deep-tillage rippers, large bale handling forks, or heavy slashers on farms where a Fiat tractor is the primary machine for multiple implement types. The 200 bar pressure rating allows these tractors to develop high breakout force from their 3-point hitch and remote cylinders, which is critical when operating deep-rooting subsoilers or other implements that place maximum hydraulic demand on the circuit.

When a 25 ml/200 bar pump wears, the reduction in volumetric efficiency is most noticeable under maximum load — the implement that previously lifted cleanly at full stroke now slows or pauses before reaching its working position. This is a clear indication that internal gear leakage is increasing and pump replacement should be planned. The {sku} provides a correctly specified replacement at aftermarket pricing. Contact us to confirm availability.

Displacement and Pressure Verification Before Ordering

Because this pump is identified by specification (25 ml/200 bar) rather than a single OEM catalogue number, pre-order verification is essential. Confirm the displacement from the pump data plate or the tractor workshop manual. The 200 bar pressure rating is a minimum requirement for the replacement — do not substitute a pump rated below 200 bar in this application. If both displacement and pressure are confirmed, the {sku} is the correct replacement.

Pre-fill the replacement pump with clean hydraulic fluid before installation. On high-pressure systems, ensure all hoses and fittings are in good condition and rated to the 200 bar circuit pressure — use the pump replacement as an opportunity to inspect and replace any degraded high-pressure hoses. For ordering or technical support, contact our team via the contact page.

About GBC

GBC is a specialist supplier of aftermarket agricultural and industrial hydraulic components, operating across Australia and key global markets. With a manufacturing background spanning gear pumps, hydraulic cylinders, power transmission components, and tractor drivetrain parts, GBC provides OEM-grade replacement parts with flexible order quantities and competitive lead times. Our sourcing team works directly with certified factories to ensure every unit meets or exceeds original equipment specifications. Learn more on our About Us page, or browse our full range at the GBC homepage.

Frequently Asked Questions