Inch Series Tapered Roller Bearings – Single Row, 15–210mm Bore
Inch Series Tapered Roller Bearings – Single Row, 15–210mm Bore - Image 2

Inch Series Tapered Roller Bearings – Single Row, 15–210mm Bore

GBC-supplied inch numeric series tapered roller bearings, d 15–210 mm. Covers all-numeric ABMA designations. Interchangeable with SKF, FAG, NSK and Timken

MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.

SKU: GBC-INCH-NUM-TRB Categories: , , Tags: , , , , , , ,
Inquiry Now

INCH SERIES TAPERED ROLLER BEARINGS — NUMERIC SERIES

Bore d 15–210 mmDynamic load up to 881,000 NSingle row, separable cone and cupInterchangeable with SKF / FAG / NSK / TimkenMOQ 100 pcs

Series Overview

The inch numeric series covers a broad range of single-row tapered roller bearings identified by all-numeric ABMA designation codes, spanning bore diameters from 15 mm to 210 mm.

All bearings share the same operational principle: tapered rollers running between a matched cone and cup with converging raceways enabling combined radial and axial load capacity. Supplied by GBC as matched cone-and-cup assemblies, interchangeable with SKF, FAG, NSK and Timken equivalents. MOQ 100 pieces.

Key Design Features

Combined radial and axial load capacity

Tapered raceway geometry carries simultaneous radial and one-directional axial thrust.

Interchangeable with all major brands

All models dimensionally equivalent to SKF, FAG, NSK and Timken inch tapered roller bearings. Direct drop-in replacement.

Wide bore coverage — 15 mm to 210 mm

The numeric series spans the full range of commonly used inch tapered roller sizes.

Available as matched or separate sets

Cone and cup supplied as matched assemblies. Separate cone or cup available on request.

INCH SERIES TAPERED ROLLER BEARINGS — NUMERIC SERIES dimensions d D T

Boundary dimensions: d bore  ·  D outer diameter  ·  T / B width (mm)

Complete Specification Table

Dimensions in mm  ·  Load ratings in N  ·  Weight in kg

02xxx – 26xxx series (d 15–43 mm)

Bearing No. d D T Dynamic (N) Static (N) Weight (kg)
02474/02420 28.575 68.262 22.225 59,100 70,200 0.40
02475/02420 31.750 68.262 22.225 59,100 70,200 0.37
07097/07196 25.000 50.005 13.495 27,000 29,600 0.11
09067/09195 19.050 49.225 18.034 39,700 40,500 0.18
11590/11520 15.875 42.862 14.288 17,400 17,400 0.10
13685/13621 38.100 69.012 19.050 52,500 67,900 0.28
14116/14276 30.226 69.012 19.845 50,600 61,700 0.36
14585/14525 34.925 68.262 20.638 54,800 68,100 0.32
15100/15245 25.400 62.000 19.050 46,800 53,900 0.29
15578/15520 25.400 57.150 17.462 42,600 50,100 0.21
17887/17831 45.230 79.985 19.842 61,000 76,000 0.41
18590/18520 41.275 73.025 16.667 47,000 58,100 0.27
24780/24720 41.275 76.200 22.225 69,900 89,200 0.41
25577/25520 42.875 82.931 23.812 83,800 111,000 0.58

27xxx – 29xxx series (d 33–83 mm)

Bearing No. d D T Dynamic (N) Static (N) Weight (kg)
27684/27620 76.200 125.412 25.400 104,000 167,000 1.23
2780/2720 36.487 76.200 23.812 80,400 102,000 0.52
2788/2720 38.100 76.200 23.812 80,400 102,000 0.49
28579/28520 49.987 89.980 24.750 91,600 130,000 0.66
29585/29520 63.500 107.950 25.400 102,000 158,000 0.91
29675/29620 69.850 112.712 25.400 102,000 166,000 0.95

30xxx – A60xx series (d 31–210 mm)

Bearing No. d D T Dynamic (N) Static (N) Weight (kg)
33275/33462 69.850 117.475 30.162 128,000 197,000 1.25
367/362 45.000 90.000 20.638 79,500 95,800 0.58
387A/382A 57.150 96.838 21.000 84,200 108,000 0.57
390/394A 57.150 110.000 22.000 91,600 126,000 0.93
39580/39520 57.150 112.712 30.162 155,000 224,000 1.37
47679/47620 76.200 133.350 33.338 167,000 262,000 1.90
480/472 68.262 120.000 29.794 133,000 186,000 1.34
495/493 82.550 136.525 30.162 143,000 216,000 1.60
575/572 76.200 139.992 36.512 191,000 292,000 2.37
593/592A 88.900 152.400 39.688 200,000 319,000 2.73
64450/64700 114.300 177.800 41.275 254,000 419,000 3.45
67989/67920 209.550 282.575 46.038 393,000 881,000 7.97
71450/71750 114.300 190.500 47.625 337,000 543,000 5.14
795/792 120.650 206.375 47.625 350,000 593,000 6.34
A6075/A6157 19.050 39.992 12.014 12,400 12,300 0.07

Typical Applications

The inch numeric tapered roller series is the workhorse of Australian agricultural, mining and heavy industrial machinery.

Agricultural machinery

Gearboxes, axles, wheel hubs, baler and harvester drivetrain shafts

Mining and bulk handling

Conveyor pulleys, crusher drives, screen and feeder shafts

Industrial gearboxes

Speed reducers, helical and worm gear units, mixer drives

Heavy vehicle drivetrains

Truck axle ends, differential pinions, wheel hub units

Construction equipment

Excavator drives, crane rope drums, concrete mixer drives

Pumps and compressors

Centrifugal pump shafts, compressor crankshafts, blower drives

Need a specific inch tapered roller bearing?

Contact us for pricing and stock. We can cross-reference any SKF, FAG, NSK or Timken inch tapered roller part number.

Contact Us

GBC-supplied inch numeric series tapered roller bearings, d 15–210 mm. Covers all-numeric ABMA designations. Interchangeable with SKF, FAG, NSK and Timken

MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.

Contact Us

Email

sales@australia-drive.com

stuart_hamill@generalbearing.com.au

Tel: +61 3 9070 7991

SKU: GBC-INCH-NUM-TRB Categories: , , Tags: , , , , , , ,

Related products

quote form