Fiat 480 Tractor Hydraulic Gear Pump Replacement – 5179722

GBC-5179722 is a direct-replacement external gear pump for the Fiat 480 tractor and closely related Fiat compact series models. It restores hydraulic output to implement lift, 3-point hitch, and auxiliary circuits on small-frame Fiat tractors used in orchard, vineyard, and compact horticultural operations. Built to OEM or better standards, direct drop-in installation with no modifications required.

MOQ: flexible. Minimum order value USD 1,500; mixed orders and trial quantities welcome.

GBC-5179722 — Fiat 480 Tractor Hydraulic Gear Pump Replacement – 5179722

The Fiat 480 is a compact row-crop tractor in the 45–50 hp range, making it one of the smaller models in the Fiat agricultural series. Its narrow track width and low ground clearance made it particularly suitable for work between grapevine rows, in olive groves, and in other close-planted orchard configurations where larger tractors cannot operate without causing crop damage. In Australia, small-frame Fiat tractors including the 480 are found on boutique wineries, small fruit orchards, and intensive market gardens — farms where hydraulic reliability is essential but the tractor fleet size does not justify a large parts inventory.

The {sku} is an aftermarket replacement hydraulic gear pump matched to OEM reference 5179722 for the Fiat 480 and closely related compact series models. It delivers correct hydraulic flow for the 3-point hitch, remote cylinder, and auxiliary implement circuits on these compact tractors. For the full Fiat and European tractor hydraulic pump range from GBC, visit the GBC homepage.

Fiat 480 compact tractor hydraulic gear pump replacement 5179722 GBC-5179722

OEM Reference and Compact Fiat Series Fitment

The 5179722 OEM reference identifies the specific hydraulic pump for the Fiat 480 compact series. The Fiat compact tractor range of this era used several different pump displacements matched to the output requirements of the specific model’s hydraulic circuit — confirm that 5179722 appears on your existing pump body before ordering.

Tractor Make Model / Series Notes
Fiat 480 Compact series, 45–50 hp
Fiat Related compact series Verify 5179722 OEM reference

Technical Specifications

Specification Value
Applied To Fiat Tractors
OEM Ref No 5179722
Manufactory Ref No Fiat 480
Nominal Displacement 11.0 ml/r
Maximum Pressure 160 bar
Rotational Speed 500–3200 r/min
Controlled Flow Rate 16.0 L/min
Fuel Feed Hole Φ20
Fuel Discharge Hole Φ13.6
Direction of Rotation → Right (Clockwise)

Small Fiat Tractors in Orchard and Vineyard Work

Orchard and vineyard tractors like the Fiat 480 are specifically selected for their ability to operate in confined inter-row spaces without damaging root zones or canopies. The hydraulic system on these compact tractors must deliver reliable performance for side-mount mower positioning, spray boom height control, and 3-point hitch implement depth adjustment — all of which require precise, responsive hydraulic control. A worn gear pump on a vineyard tractor is not merely a maintenance issue; it directly affects the quality and precision of cultural operations during the growing season.

Compact Fiat tractors in vineyard and orchard service typically accumulate hours in a seasonal pattern — high utilisation during pruning, spraying, and harvest, lower use in off-season. This cyclical pattern can accelerate seal degradation on hydraulic pumps because the seals experience repeated heat-up and cool-down cycles during the high-utilisation season. Monitoring for early signs of pump seal failure — oil weeping around the shaft or pump body — allows planned replacement of the {sku} during the off-season rather than emergency replacement mid-harvest. Contact us for pre-season parts orders.

Fiat 480 compact tractor vineyard and orchard operation Australia

⚙

Compact-Spec Gear Profile

Displacement matched to the Fiat 480’s compact hydraulic circuit requirements — not over-specified for a compact tractor application.

↻

Seasonal Reliability

Designed to maintain hydraulic performance across seasonal high-demand and off-season cycling typical of orchard and vineyard operations.

🔧

Boutique Winery Compatible

Suitable for small-fleet operators and boutique wineries where a single tractor performs all hydraulic implement tasks.

✓

OEM 5179722 Confirmed

Aftermarket replacement confirmed against Fiat OEM reference 5179722 for unambiguous fitment verification.

Installation and Compact Tractor Pump Care

On compact Fiat tractors like the 480, pump accessibility is generally good due to the compact layout of the transmission and hydraulic block. Take care when removing hydraulic hoses — residual fluid pressure may be retained in the circuit even after engine stop. Use a clean drain pan and cap all open connections immediately to prevent contamination of the small-capacity hydraulic sump.

After fitting the {sku}, pre-fill through the inlet port and start the engine at low idle. Cycle the 3-point hitch and any connected remote cylinder circuit to bleed air from the system. Check fluid level and top up as required. Visit our contact page for ordering or About Us for our sourcing credentials.

Fiat 480 compact tractor hydraulic pump maintenance small orchard workshop

About GBC

GBC is a specialist supplier of aftermarket agricultural and industrial hydraulic components, operating across Australia and key global markets. With a manufacturing background spanning gear pumps, hydraulic cylinders, power transmission components, and tractor drivetrain parts, GBC provides OEM-grade replacement parts with flexible order quantities and competitive lead times. Our sourcing team works directly with certified factories to ensure every unit meets or exceeds original equipment specifications. Learn more on our About Us page, or browse our full range at the GBC homepage.

Frequently Asked Questions

Is this an OEM part or an aftermarket replacement?
This is a high-quality aftermarket replacement part engineered to meet or exceed the original OEM specification. It is not manufactured by the original tractor brand but is produced to precise dimensional and performance tolerances to provide a direct-fit, drop-in installation without modification.
How do I confirm fitment before ordering?
The safest method is to match your existing pump's OEM part number against the reference numbers listed on this page. You can also measure the pump body dimensions, port sizes, shaft diameter, and displacement (cc/rev) and compare with the specifications table above. If you are unsure, contact our team with your tractor model, year, and serial number for confirmation.
What is the minimum order quantity and lead time?
We offer flexible MOQ to suit all buyers. Trial or sample orders of 1–5 units are accepted. Mixed orders (multiple pump types) are welcome with a minimum order value of approximately USD 1,500. For small single-unit orders, pricing is slightly higher to reflect handling costs. Lead times are: 10–25 business days for stocked items; 20–45 business days for standard production runs; 45–120 business days for large or custom orders. Standard shipment terms include EXW, FOB, and CIF/DAP; FCA, CFR, CPT, CIP, and DDP are available by negotiation. Contact us to discuss your requirement.
What hydraulic fluid should I use with this pump?
Most tractor applications require a clean, high-quality hydraulic/transmission oil meeting the original manufacturer’s specification — commonly a UTTO (Universal Tractor Transmission Oil) or a dedicated hydraulic oil such as ISO VG 46 or VG 68, depending on climate and operating temperature. Always follow the fluid specification in your tractor’s operator manual. Contaminated or incorrect fluid is the leading cause of premature gear pump failure.
Can I install this pump without specialist workshop tools?
In most cases, yes. These external gear pumps are bolted to the transmission or engine block with standard fasteners. You will need basic hand tools, clean rags, and the ability to correctly torque mounting bolts to specification. We recommend flushing the hydraulic circuit before installation to remove any debris from the failed pump, and pre-filling the new pump with clean hydraulic fluid before starting the engine. If you are not confident, a local agricultural mechanic can complete the job in 1–3 hours for most models.
Do you provide after-sales support and warranty?
Yes. GBC provides technical support for fitment confirmation and installation queries. Replacement or refund policies apply for manufacturing defects confirmed within the warranty period. Contact our team for warranty terms applicable to your order, or visit our About Us page for supplier background information.

Ready to Order or Need Technical Advice?

Our hydraulic pump specialists are ready to confirm fitment, discuss MOQ, and arrange freight to your location anywhere in Australia and beyond.

📈 Contact Us Today

GBC-5179722 is a direct-replacement external gear pump for the Fiat 480 tractor and closely related Fiat compact series models. It restores hydraulic output to implement lift, 3-point hitch, and auxiliary circuits on small-frame Fiat tractors used in orchard, vineyard, and compact horticultural operations. Built to OEM or better standards, direct drop-in installation with no modifications required.

MOQ: flexible. Minimum order value USD 1,500; mixed orders and trial quantities welcome.

quote form