Bronze Liner

Outer race lined with bronze for wear resistance and shock load tolerance.

UNF Female Thread

Internal Unified National Fine thread for connection to male-threaded clevis pins.

Lubrication Hole

Lubrication hole and grease cup for in-situ re-lubrication.

9 Inch Sizes

3/16 to 1 inch bore covering standard US/UK imperial shaft sizes.

Left/Right Thread

Right-hand standard. Left-hand suffix L.

Imperial Dimensions

All dimensions in inches for direct US standard part replacement.

Bronze Tin-Bronze Liner

Press-fitted. Steel/bronze sliding contact pair.

Hardened Steel Inner Ring

Ground spherical OD as running surface against bronze liner.

Zinc-Plated Rod Body

Zinc electroplated carbon steel.

Agricultural Equipment USA/UK

Standard inch-dimension rod end replacement for US and UK agricultural equipment.

Construction Machinery

Inch-standard rod end connections on US-market construction equipment.

Forestry Equipment

Log processing and forestry machine linkages using inch-dimension shaft standards.

Industrial Maintenance

Direct replacement for worn inch-dimension rod ends in existing machinery.

Marine US Standard

US-standard rod ends for marine deck equipment and steering systems.

Mining Equipment US

Conveyor belt tension arm rod ends on US-standard mining equipment.

🔎 Thread Class

Use UNF thread class 2 engagement minimum.

🔧 Initial Greasing

Apply NLGI-2 EP grease through hole or cup before commissioning.

📈 Re-lubrication

Every 200–500 hours. Increase in wet or contaminated environments.

⚙ Slow Speed Only

Bronze-steel limited to slow oscillating motion.

🌡 Temperature

-30 to +100 C with standard mineral EP grease.

✅ Replace Complete Unit

Bronze liner not separately replaceable.

📞 Ready to Order?

MOQ is 100 units per model. Provide bore diameter, thread specification, load case, and operating environment. All catalogue data is for reference only.