6200 Series Deep Groove Ball Bearings – Open, Z, 2Z, RS, 2RS – Fast Delivery Australia
GBC-supplied 6200 series deep groove ball bearings, 6200 to 6222, d 10–110 mm. Most widely stocked DGBB series. Open, Z, 2Z, RS and 2RS. Fast delivery Australia
MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.
DEEP GROOVE BALL BEARINGS — 6200 SERIES
Series Overview
The 6200 series is the most widely used and broadly stocked deep groove ball bearing series in Australia. With bore diameters from 10 mm to 110 mm, the 6200 has a larger outer diameter and higher load rating than the 6000 series at equivalent bore sizes.
All models from 6200 to 6219 are available in open, Z, 2Z, RS and 2RS configurations. The 6209 is also available with snap ring groove (NR). 2RS variants are pre-greased, maintenance-free. Interchangeable with SKF, FAG, NSK, Koyo and NTN equivalents. Fast delivery across Australia, MOQ 100 pieces.
Key Design Features
High-speed capable
Deep groove geometry minimises friction, enabling higher speed ratings than comparable roller bearings.
Open / Z / 2Z / RS / 2RS configurations
Open, single-shielded (Z), double-shielded (2Z), single-sealed (RS) and double-sealed (2RS) variants. 2RS variants are pre-greased, maintenance-free.
Low noise and vibration
Precision ground raceways and matched ball sets produce smooth, quiet running — essential for electric motors, HVAC fans and precision instruments.
Interchangeable with SKF, FAG, NSK, Koyo
All models dimensionally equivalent to major manufacturer equivalents. Direct drop-in replacement.
Boundary dimensions: d bore · D outer diameter · T / B width (mm)
Complete Specification Table
Dimensions in mm · Load ratings in kN · Weight in kg
6200 to 6210 — d 10–50 mm (all seal variants available)
| Bearing No. | d | D | B | Dynamic (kN) | Static (kN) | Weight (kg) |
|---|---|---|---|---|---|---|
| 6200 | 10 | 30 | 9 | 5.1 | 2.39 | 0.032 |
| 6201 | 12 | 32 | 10 | 6.8 | 3.06 | 0.037 |
| 6202 | 15 | 35 | 11 | 7.6 | 3.72 | 0.045 |
| 6203 | 17 | 40 | 12 | 9.6 | 4.79 | 0.064 |
| 6204 / 6204N / 6204-Z / 6204-2Z / 6204-RS / 6204-2RS | 20 | 47 | 14 | 12.8 | 6.65 | 0.103 |
| 6205 / 6205N / 6205-Z / 6205-2Z / 6205-RS / 6205-2RS | 25 | 52 | 15 | 14.0 | 7.88 | 0.127 |
| 6206 / 6206N / 6206-Z / 6206-2Z / 6206-RS / 6206-2RS | 30 | 62 | 16 | 19.5 | 11.5 | 0.200 |
| 6207 / 6207N / 6207-Z / 6207-2Z / 6207-RS / 6207-2RS | 35 | 72 | 17 | 25.5 | 15.2 | 0.288 |
| 6208 / 6208N / 6208-Z / 6208-2Z / 6208-RS / 6208-2RS | 40 | 80 | 18 | 29.5 | 18.0 | 0.368 |
| 6209 / 6209N / 6209NR / 6209-Z / 6209-2Z / 6209-RS / 6209-2RS | 45 | 85 | 19 | 31.5 | 20.5 | 0.416 |
| 6210 / 6210N / 6210-Z / 6210-2Z / 6210-RS / 6210-2RS | 50 | 90 | 20 | 35.0 | 23.2 | 0.463 |
6211 to 6222 — d 55–110 mm
| Bearing No. | d | D | B | Dynamic (kN) | Static (kN) | Weight (kg) |
|---|---|---|---|---|---|---|
| 6211 | 55 | 100 | 21 | 43.2 | 29.2 | 0.603 |
| 6212 | 60 | 110 | 22 | 47.8 | 32.8 | 0.789 |
| 6213 | 65 | 120 | 23 | 57.2 | 40.0 | 0.990 |
| 6214 | 70 | 125 | 24 | 60.8 | 45.0 | 1.084 |
| 6215 | 75 | 130 | 25 | 66.0 | 49.5 | 1.171 |
| 6216 | 80 | 140 | 26 | 71.5 | 54.2 | 1.448 |
| 6217 / 6217N | 85 | 150 | 28 | 83.2 | 63.8 | 1.803 |
| 6218 / 6218N | 90 | 160 | 30 | 95.8 | 71.5 | 2.170 |
| 6219 / 6219N | 95 | 170 | 32 | 110.0 | 82.8 | 2.620 |
| 6220 / 6220N | 100 | 180 | 34 | 122.0 | 92.8 | 3.190 |
| 6221 / 6221N | 105 | 190 | 36 | 133.0 | 105.0 | 3.780 |
| 6222 / 6222N | 110 | 200 | 38 | 144.0 | 117.0 | 4.420 |
Typical Applications
The 6200 series is the benchmark general-purpose deep groove ball bearing — the most commonly replaced bearing across Australian industry.
Electric motors
Motor shaft bearings across all power ratings
Fans and blowers
Industrial fan shafts, HVAC blowers, cooling fan drives
Pumps
Centrifugal pump shaft bearings, submersible pump bearings
Gearboxes
Light to medium speed reducer shafts, conveyor drive gearboxes
Agricultural equipment
Implement and harvester drive shafts, pivot bearings
Conveyor systems
Idler and return roller bearings, belt drive pulleys
Need 6200 series deep groove ball bearings?
Contact us for pricing and stock. Fast delivery across Australia. Interchangeable with SKF, FAG and NSK 6200 series.
GBC-supplied 6200 series deep groove ball bearings, 6200 to 6222, d 10–110 mm. Most widely stocked DGBB series. Open, Z, 2Z, RS and 2RS. Fast delivery Australia
MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.
Related products
-
LMHP Linear Bearing LUU Series — Square Flanged Extended Length Ball Bushing
-
LMHP Linear Bearing UU Series — Square Flanged Sealed Ball Bushing
-
KR KRV Series Cam Follower Needle Roller Bearing — Stud Type Sealed
-
LIN-02 Series Sliding Membrane — Standard Open Type Plastic Linear Bearing
-
ST B Series — Stroke Bearing Heavy Duty Type Linear and Rotary Motion
-
LMFP LMKP Linear Bearing UU Series — Flanged Sealed Ball Bushing with Positioning Groove