Ford 2810 2910 3230 3400 4100 4130 4600 4610 Tractor Hydraulic Gear Pump Replacement – 16ml

GBC-F0NN600AA — Ford 2810 2910 3230 3400 4100 4130 4600 4610 Tractor Hydraulic Gear Pump Replacement – 16ml

Ford's compact and mid-range tractor series — the 2810, 2910, 3230, 3400, 4100, 4130, 4600, and 4610 — were produced across several decades and became some of the most common utility tractors on Australian properties. These machines use an external gear pump mounted to the engine or transmission to supply hydraulic flow to the three-point hitch, remote cylinders, and in some configurations power steering. The 16 ml/r pump specified for these models has a left-hand (anti-clockwise) shaft rotation and uses a Φ20 mm inlet port and Φ13.5 mm discharge port.

The GBC-F0NN600AA is a direct-replacement hydraulic gear pump for this Ford series, matching OEM references F0NN600AA, 81863197, and 82023350. With a displacement of 16.0 ml/r, a rated pressure of 160 bar, and a maximum speed of 2,000 r/min, it delivers the flow volume needed for responsive hydraulic system performance on these compact and mid-size Ford models. For the complete GBC range, visit the GBC homepage.

MOQ: flexible. Minimum order value USD 1,500; mixed orders and trial quantities welcome.

OEM Reference Numbers and Fitment

The GBC-F0NN600AA replaces Ford OEM part numbers F0NN600AA, 81863197, and 82023350. These numbers appear on the pump body, in the Ford parts microfiche, and in aftermarket parts catalogues for the listed Ford models. If your pump carries any of these references, the GBC-F0NN600AA is your direct replacement. Note that the 2,000 r/min maximum speed is lower than the 3,000 r/min of some other Ford pumps — do not fit a higher-displacement pump without checking system capacity. Contact us to confirm fitment.

Technical Specifications

Speed Limitation and System Compatibility

The GBC-F0NN600AA has a maximum rated speed of 2,000 r/min — lower than many other Ford pump variants. This is an important specification to observe. Operating the pump above maximum rated speed causes cavitation, overheating, and accelerated wear. On the compact Ford models listed, the PTO and hydraulic pump drive speed is matched to this specification.

If your tractor normally operates these pumps at speeds approaching 2,000 r/min under load, ensure the hydraulic oil is changed and the suction filter is clean before fitting the replacement. Restricted suction flow at higher speeds dramatically increases cavitation risk. Contact us if you are unsure about drive speed compatibility on your specific tractor.

Ford 2810–4610 Hydraulic System Overview

These compact and mid-size Ford tractors typically use a single-section hydraulic pump to supply the draft control system, three-point linkage, and — where fitted — a single remote cylinder circuit. The pump is driven from the engine timing gear train and is usually mounted on the right-hand side of the engine block or on the timing case cover. Flow is regulated by the hydraulic control valve and directed to the lift cylinder and remote circuits as demanded.

When replacing the pump, inspect the drive gear or coupling for wear. A worn drive coupling transfers torsional shock directly to the new pump's shaft and will shorten its service life. Replace the coupling if there is any visible wear or looseness. Contact our team if you need assistance.

Ordering and Lead Times

GBC-F0NN600AA is stocked for buyers in Australia and internationally. We supply this pump to agricultural parts dealers, hydraulic repair workshops, and individual machine owners. Orders ship with standard packing documentation, and we can provide certificates of conformity for wholesale buyers.

For current pricing and stock availability, contact our sales team. Mixed orders combining multiple Ford pump variants are welcome with a minimum order value of USD 1,500.

About GBC

GBC is a specialist supplier of aftermarket agricultural and industrial hydraulic components, operating across Australia and key global markets. With a manufacturing background spanning gear pumps, hydraulic cylinders, power transmission components, and tractor drivetrain parts, GBC provides OEM-grade replacement parts with flexible order quantities and competitive lead times. Our sourcing team works directly with certified factories to ensure every unit meets or exceeds original equipment specifications. Learn more on our About Us page, or browse our full range at the GBC homepage.

Frequently Asked Questions