SSUCF-EHB-ESB All Stainless Steel 4-Bolt Flange Bearing Units
Compare mounting style, shaft locking, bore range and installation envelope before selecting the alternative.
SSUCF-A All Stainless Steel 4-Bolt Flange Bearing Units
SSUCF-A-SERIES belongs to the all stainless steel bearing units range. It is supplied as a 4-bolt flange bearing units with all-stainless housed construction and setscrew locking; compare four-hole flange pattern, centre opening and rear clearance before approval.
Identify the dimensions that locate the support: bore, centreline, fixing pattern, outside diameter, bracket offset or take-up guide dimensions, depending on the product form. Read the stated values; do not scale the illustration. A picture can be resized for presentation and should never be treated as a measurement source.
MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.
Representative
SSUCF205A
Mounting
4-bolt flange, A style
Locking
Setscrew
Representative bore
25 mm
Housing material
SUS 304
Set screw
SUS 304
Drawing-Led Model Approval
Drawing-led buying notes
SSUCF-A-SERIES belongs to the all stainless steel bearing units range. It is supplied as a 4-bolt flange bearing units with all-stainless housed construction and setscrew locking; compare four-hole flange pattern, centre opening and rear clearance before approval.
Applications include food, beverage, pharmaceutical and chemical-process equipment using complete stainless mounted supports. Treat that as context only; dimensions and environment at the real bearing point control the final selection.
Technical Specifications & Drawing
| Representative bore | 25 mm |
|---|---|
| Representative model | SSUCF205A |
| Mounting form | 4-bolt flange, A style |
| Locking | Setscrew |
| Housing material | SUS 304 |
| Set screw | SUS 304 |
| Retainer | SUS 201 |
| Slinger & frame | SUS 304 |
| Inner & outer rings | SUS 440 |
| Balls | SUS 440 |
| Grease nipple | SUS 304 |
| Operating temperature | -20 C to 120 C |
| Load / Housing Strength Reference | |
| Recommended set-screw torque for SUC204-206 | 3.9 N.m |
Drawing-Led Model Approval
Product images are useful for recognition, but drawings are the better approval tool when several bearing units share the same general appearance. The drawing shows the interfaces that actually determine whether the unit belongs on the machine.
Identify the dimensions that locate the support: bore, centreline, fixing pattern, outside diameter, bracket offset or take-up guide dimensions, depending on the product form. Read the stated values; do not scale the illustration. A picture can be resized for presentation and should never be treated as a measurement source.
For existing equipment, mark the measured machine values directly on a copy of the drawing or provide a separate sketch. This creates a simple comparison between the proposed model and the installation. It is especially useful when the frame has been modified and the original machine drawing is no longer fully representative.
Save the approved drawing with the spare-parts record. Future buyers can then verify a substitute against the same dimensional reference instead of restarting the identification process from photographs.
Use stated dimensions only
Use the drawing to compare four-hole flange pattern, centre opening and rear clearance. Read the printed values rather than scaling the illustration; for modified equipment, send current machine measurements with the enquiry.
Applications
Food & Beverage
SSUCF205A can be considered for food & beverage where its 4-bolt flange, a style geometry matches the machine. Four-hole pitch, rear clearance and centre opening control the flange interface.
Pharmaceutical Equipment
For pharmaceutical equipment, the setscrew arrangement changes installation access and shaft retention. Confirm that detail before standardising the spare.
Washdown Packaging Lines
In washdown packaging lines service, use the construction of SSUCF205A only where the actual moisture, contamination and cleaning conditions match the selected product family.
Related Products
SSUCFL-A All Stainless Steel 2-Bolt Flange Bearing Units
Compare mounting style, shaft locking, bore range and installation envelope before selecting the alternative.
SSUEF-EHB-ESB All Stainless Steel 4-Bolt Flange Bearing Units
Compare mounting style, shaft locking, bore range and installation envelope before selecting the alternative.
Drawing-based RFQ
Attach the machine-side drawing or marked-up dimensions and identify the required shaft-locking method.
SSUCF-A-SERIES belongs to the all stainless steel bearing units range. It is supplied as a 4-bolt flange bearing units with all-stainless housed construction and setscrew locking; compare four-hole flange pattern, centre opening and rear clearance before approval.
Identify the dimensions that locate the support: bore, centreline, fixing pattern, outside diameter, bracket offset or take-up guide dimensions, depending on the product form. Read the stated values; do not scale the illustration. A picture can be resized for presentation and should never be treated as a measurement source.
MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.
Related products
-
LMES Series — Small Metric Linear Bearing Sealed and Open Type
-
KH Series — Mini Pressing Bush Linear Bearing
-
LIN-02 Series Sliding Membrane — Standard Open Type Plastic Linear Bearing
-
LMEFC LMEKC Linear Bearing UU Series — Euro Flanged Sealed Ball Bushing with Locking Screw
-
LMHP Linear Bearing LUU Series — Square Flanged Extended Length Ball Bushing
-
LME Linear Bearing UU Series — Euro Standard Sealed Ball Bushing