TP-SUEFL Thermoplastic 2-Bolt Flange Bearing Units
Compare mounting style, shaft locking, bore range and installation envelope before selecting the alternative.
TP-SUCFL Thermoplastic 2-Bolt Flange Bearing Units
TP-SUCFL-SERIES belongs to the thermoplastic housed units range. It is supplied as a 2-bolt flange bearing units with corrosion-resistant thermoplastic housing and setscrew locking; compare two-hole spacing, flange length and shaft centre position before approval.
Measure the journal rather than assuming an old equipment list is still correct. Previous repairs may have introduced sleeves, polished seating areas or local modifications that are not recorded in the original documentation. The shaft surface also deserves attention: burrs, corrosion and old locking marks can make a new insert difficult to install even when the nominal bore is right.
MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.
Representative
TP-SUCFL205
Mounting
2-bolt flange
Locking
Setscrew
Representative bore
25 mm
H
131 mm
J
99 mm
Shaft-First Selection
Shaft-first buying notes
TP-SUCFL-SERIES belongs to the thermoplastic housed units range. It is supplied as a 2-bolt flange bearing units with corrosion-resistant thermoplastic housing and setscrew locking; compare two-hole spacing, flange length and shaft centre position before approval.
Applications include food processing, bottling, packaging and wet-process machinery. Treat that as context only; dimensions and environment at the real bearing point control the final selection.
Technical Specifications & Drawing
| Representative bore | 25 mm |
|---|---|
| H | 131 mm |
| J | 99 mm |
| A2 | 17 mm |
| A1 | 14 mm |
| A | 29 mm |
| N | 11 mm |
| L | 69 mm |
| B | 34.1 mm |
| S | 14.3 mm |
| Z | 36.7 mm |
| Bolt size | M10 |
| Weight | 0.32 kg |
| Load / Housing Strength Reference | |
| Housing breaking point - mode 1 | 12,554 N |
| Mode 2 | 15,093 N |
| Mode 3 | 5,310 N |
Shaft-First Selection
A good bearing selection starts at the shaft because every other decision depends on that interface. Bore size, shaft condition and the retention method should be established before the housing is treated as final.
Measure the journal rather than assuming an old equipment list is still correct. Previous repairs may have introduced sleeves, polished seating areas or local modifications that are not recorded in the original documentation. The shaft surface also deserves attention: burrs, corrosion and old locking marks can make a new insert difficult to install even when the nominal bore is right.
Once the shaft connection is clear, work outward to housing geometry and machine mounting. This sequence keeps two different questions separate: whether the insert belongs on the shaft, and whether the complete unit belongs on the frame. Mixing those decisions is a common reason a substitute looks convincing on paper but does not fit during maintenance.
If the shaft has visible damage, include photos and measurements in the enquiry. A replacement bearing should not be expected to correct a mechanical problem at the seating area. Addressing the shaft condition at the same time usually produces a cleaner, more repeatable repair.
Journal and housing dimensions
Use the drawing to compare two-hole spacing, flange length and shaft centre position. Read the printed values rather than scaling the illustration; for modified equipment, send current machine measurements with the enquiry.
Applications
Food Processing
TP-SUCFL205 can be considered for food processing where its 2-bolt flange geometry matches the machine. Two-hole spacing and flange thickness should be checked before replacing an older support.
Bottling & Packaging
For bottling & packaging, the setscrew arrangement changes installation access and shaft retention. Confirm that detail before standardising the spare.
Washdown Machinery
In washdown machinery service, use the construction of TP-SUCFL205 only where the actual moisture, contamination and cleaning conditions match the selected product family.
Related Products
TP-SUEF Thermoplastic 4-Bolt Flange Bearing Units
Compare mounting style, shaft locking, bore range and installation envelope before selecting the alternative.
TP-SUCF Thermoplastic 4-Bolt Flange Bearing Units
Compare mounting style, shaft locking, bore range and installation envelope before selecting the alternative.
Shaft-measurement RFQ
Provide the measured shaft, any sleeve or repair detail, mounting dimensions and requested quantity.
TP-SUCFL-SERIES belongs to the thermoplastic housed units range. It is supplied as a 2-bolt flange bearing units with corrosion-resistant thermoplastic housing and setscrew locking; compare two-hole spacing, flange length and shaft centre position before approval.
Measure the journal rather than assuming an old equipment list is still correct. Previous repairs may have introduced sleeves, polished seating areas or local modifications that are not recorded in the original documentation. The shaft surface also deserves attention: burrs, corrosion and old locking marks can make a new insert difficult to install even when the nominal bore is right.
MOQ: 50 pcs. Minimum order value USD 1,500; mixed orders and trial quantities welcome.
Related products
-
LIN-01R Series — Standard Cylindrical Plastic Linear Bearing with Aluminum Housing
-
LM Linear Bearing LUU Series — Extended Length Double Sealed Ball Bushing
-
KH Series — Mini Pressing Bush Linear Bearing
-
LMEF LMEK Linear Bearing LUU Series — Euro Standard Flanged Extended Length Ball Bushing
-
LMEF LMEK Linear Bearing UU Series — Euro Standard Flanged Sealed Ball Bushing
-
LMF LMK LMH Linear Bearing LUU Series — Standard Flanged Extended Length Ball Bushing